- Product description
-
Product descriptionSurge arrester, type 2
• Complete unit consisting of upper part and base, pre-mounted and ready for connection
• Suitable for TN-C network systems
• Plug-in cover; cover can be separated from base without tools
• Incl. thermal and dynamic cut-off unit
• With visual display of defects
• High current conductivity and long service life
• Labelled connections
• Leakage current-free
Application example: Residential buildings, single-family homes and industrial
* Complete = cover and base
- Technical data
-
Connectivity options
Arrester surge current (8/20 µs) [total] 20 kA Blow-out no Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm² Conductor cross-section, rigid (single-wire/multiwire), min. 2,5 mm² Dimension 385V Installation type DIN rail 35 mm Lightning protection zone LPZ 1→2 Max. mains-side overcurrent protection 125 Maximum back-up fuse 125 A Maximum continuous voltage AC 385 V Maximum discharge current (8/20 μs) 25 kA Network form Other Nominal discharge current (8/20 µs) 20 kA Nominal voltage AC (50/60 Hz) 350 V Operating temperature, max. 80 °C Operating temperature, min. -40 °C Pole version 1 Protection rating IP20 Remote signalling no Response time <100 ns Signalling on device Visual SPD to EN 61643-11 Type 2 SPD to IEC 61643-1 Class II Test class, type 2 yes Version for 1-pole complete; 385 V - All types
- Downloads
-
Data sheet V20-VA 1-385 / 5099475 , 0.22MB , pdfCatalogue Überspannungsschutz , 28.42MB , pdf
India - English